The post yorkville_EF500P appeared first on Containall.
]]>This combination of amplifier technologies keeps distortion to a minimum while reducing the heat dissipation to a level low enough to eliminate the need for heavy heatsinks for the overall power stage. As an additional advantage, our unique combination of two-tier and Class D amplification has reduced extraneous heat to the point that EF500P can easily be used in any orientation, and close to walls, floors and in close arrays with multiple cabinets. We have found that competitive active loudspeakers with large finned heatsinks need to be operated vertically and with clearance to ensure proper heat dissipation and ventilation. Since the EF500P is ideal for flying in large clusters and in point source concert sound systems, our designers took extra care making sure that in tight clusters overheating would not be an issue.
We’ve also found an opportunity to tweak the electronics for maximum overall speaker performance and protection. Borrowing some ideas from our powerful and popular TX Series PA systems, the limiters used in the input and crossover stages are a complex combination of gain reduction and sweeping filters. As the EF500P is being pushed to its maximum input / output levels, it’s advanced filtering begins rolling off unnecessary subsonic frequencies. In addition the processing protects the individual components ensuring failure free operation even after long term operation at close to maximum output levels. The filter has remarkable (less than 70ms) response times, allowing the system to constantly be retuning itself to make sure the output is as clean, as loud and as clear as possible at any given moment. This is achieved without negatively affecting the overall sonic quality of the cabinet. This ensures that the essential part of any mix, like the vocals or solo instruments, come out clean and clear when the cabinet is being operated at the extremes of power and woofer excursion. Extremely fast and accurate limiting is in place to protect the speaker components.
The EF500P has a built in mixer allows the loudspeaker to be used directly with a microphone and / or line source. The loop output allows additional active cabinets to be driven from one cabinet’s mixer stage, or a series of cabinets to be driven from one source. If desired, the end user can combine a pair of the EF500P’s using the mixer inputs on each cabinet and coupling the loop outputs. In this simple example you would have the ideal presentation system with two microphone inputs, two line inputs optimized for CD, Cassette or laptop computer audio source, complete within two speaker cabinets. Many of our active cabinets can be linked together but a maximum of three ‚mixers‘ can be active at any one time. (Making three mic sources and six line sources available in any three or more cabinet array). The microphone input has equalization and high pass filtering appropriate for vocal applications. The trim control allows looped cabinets to be individually adjusted in level. This is invaluable in applications where large numbers of cabinets are used such as clusters or in trade show applications or when EF500P’s are used as repeater cabinets or for side fill. The 100 Hz high pass filters allows the EF500P to be used more efficiently with any active subwoofer.
Features
• Strong plywood cabinet patterned after our proven EF508
• Ultra-clear reproduction throughout bandwidth
• Lightweight, high efficiency, high tech, 800 Watt Bi-amped power module
• Proven TX style processing and component protection
• True 2″ Titanium diaphragm horn driver
• Proven low distortion / high power handling 15″ woofer
• +/- 6dB input trim control for individual cabinet level adjustment
• XLR and TRS inputs / outputs for easy connection and looping
• Multi-input source mixer for direct inputs
• Direct microphone input with level control
• Two way overall EQ controls
• Integrated flying hardware (3/8″ threaded holes)
• Tough, full length metal grille
• Recessed Mixer panels
• System Type: 2-Way
• Active or Passive: Active
• Program Power (Watts): 800
• Biampable: Yes
• Biamp Operation Only: Yes
• Max SPL (dB): 127
• Frequency Response (Hz +/- 3db): 50 – 16k
• Crossover Frequency (Hz): 2100
• Driver Configuration: 15 inch, 2 inch
• HF Driver(s): 2 inch, ceramic magnet, 3 inch Titanium voicecoil
• HF Program Power (Watts): 150
• HF Impedance (Ohms): 8
• HF Dispersion (°H x °V): 60×40
• HF Protection: Thermal / Peak Limiter
• LF Driver(s): 15 inch ceramic magnet, 4 inch voicecoil
• LF Program Power(Watts): 650
• LF Impedance(Ohms): 8
• LF Protection: Thermal / Peak Limiter
• Total Power (Watts): 800
• HF Power Amplifier (Watts): 150
• HF Amplifier Type: Class H
• LF Power Amplifier (Watts): 650
• LF Amplifier Type: Class D
• Power Cable: Yes
• Power Switch: Yes
• Inputs: 1/4″ Jacks, 2 line inputs, 2 link (in/out)
• Inputs : XLR, 1 mic, 2 link (in/out)
• Input Impedance (Bal/UnBal): 95KOhms / 90kOhms
• Input Sensitivity (Vrms Sine) +4dBv / 1.23V (+/-6dB with trim control)
• Mixer Controls: +/- 6dB Trim control
• Mic Input w/level
• 2x 1/4″ Line Input w/level
• Treble/Bass Tweak
• 100Hz HP Filter (LF Rolloff)
• Corners Black Metal
• Feet: Plastic Glides
• Included Hardware: 3/8 inch x 9 (All Corners)
• Bar Handles: 2 Side
• Pole Mount Adapter (1 3/8″-3.5cm): 1 Bottom
• Enclosure Materials: 15mm Baltic Birch Plywood
• Grille: Heavy gauge perforated metal
• Covering / Finish: Black Ozite (Carpet)
• Optional Covering / Finishes Black Ultrathane Paint (EF500PB) 18mm Birch
• Dimensions (DWH xbackW, inches): 14.5 x 18.6 x 28.2 x 11.1
• Dimensions (DWH xbackW, cm): 71.6 x 36.8 x 47.2 x 28.1
• Weight (lbs/kg): 82.9 / 37.6
The post yorkville_EF500P appeared first on Containall.
]]>Tired of worrying about the fact that the voice isn't cutting through the mix on the stage?
Well, why not try the ART 715-A as a stage monitor.
This is the perfect speaker for live sound situations where you need extra punch in bass reproduction and extremely accurate high frequency response to hear the voice when the band is playing at full throttle.
The post RCF_715_MKII appeared first on Containall.
]]>The ART 315 is a two-way passive sound reinforcement speaker with careful acoustic design and innovative transducers technology.
A superb bass punch is guaranteed by the high power 15” low distortion woofer. ART 315 is the perfect solution for playback and installation situations where an external amplifier is required.
It is equipped with four M10 flying points.
The post RCF_315_MKIII appeared first on Containall.
]]>The post Pioneer XDJ 1000 appeared first on Containall.
]]>Equipped with Allen & Heath’s characteristic sound and build quality, this is the first time a DJ mixer at this level has incorporated professional grade features, such as total kill EQ, accurate metering, balanced outputs, high quality faders and professional-standard audio headroom. And to top it all off, there’s a “lite” version of Xone’s now legendary VCF filter system.
The post DJ Mix Allen And Heath Xone 22 appeared first on Containall.
]]>The post DJ Mix Allen And Heath Xone 22 appeared first on Containall.
]]>The post Mikrofon Shure SM58 appeared first on Containall.
]]>